Know the types of stone adhesives

Know the types of stone adhesives

• 1400/08/08 ,
• Stone Cutting Factories Aral Stone
• 0 Comment

Know the types of stone adhesives
Introducing the best sealing and coating products for all types of surfaces
Perhaps you are wondering why, despite the cement mortars, all kinds of stone adhesives have been produced and marketed? What adhesives are there for gluing stones? Which of the products on the market is better? Join us to find the answers to all these questions. Maya stone, travertine, marble

Why should stone glue be replaced with cement mortar?
Most likely you, the reader of this article, are someone who has worked with cement mortar at least once or witnessed how it is performed closely. As you know, the history of using cement is long and it is used for various applications.

One of these cases in the construction industry is related to the connection of stone and tile and… to walls and floors. Ease of use and relatively reasonable price of mortar, has caused its popularity and promotion in construction. But have you ever wondered how often you impose an extra burden on a building due to the weight of the cement mortar?

Or by using mortar; Do you do not protect your building from earthquakes, subsidence, dampness and problems caused by rapid climate change (temperature changes)? Or maybe you have seen the stone removed from the abdomen when installing the slab stone on the wall. This has even caused cracks and fractures in some cases!

All these disadvantages were eliminated to a large extent with the introduction of stone glue. Of course, it goes without saying that not every glue is glue and not all glue can be expected to be the same! Therefore, in this article, in addition to getting acquainted with different adhesives, we have introduced one of the top manufacturing companies in the world. But first of all, it is better to have a relative knowledge about the types of stone adhesives and their uses. Qorveh Saiman stone, granite stone

Types of stone adhesives by structure
Polyester stone adhesive:
These adhesives are based on polyester and due to their relatively low cost, ease of use and speed of operation, is one of the first choices of manufacturers. They can be used in all construction works for sealing or gluing. However, due to the poor durability against rapid temperature changes, the exterior of the building is not very suitable.

Compared to epoxy, these adhesives are relatively more resistant to UV discoloration. But when it comes to the strength and durability of the adhesive, megapoxy adhesive comes first. These products can be stored at room temperature and should not be at a temperature above 75 degrees Fahrenheit (24 degrees Celsius).

Because high heat and cold have a negative effect on the useful life of these adhesives. Therefore, be sure to avoid placing them in the sun or in conditions that could freeze or thaw. Since sealing surfaces is an integral part of stone work. Here are some examples of the best surface coatings (all surfaces) for sealing and..

Epoxy stone adhesive:
Epoxy adhesives are composite paste adhesives that are marketed in single-component and double-layer packages. In single-component epoxy adhesives, all components are formulated, pre-mixed, and usually require a high temperature reaction. These products are stored at low temperatures, in refrigerators and even freezers.

But the two-component type consists of two separate parts that must be combined with a certain amount (according to the mixing ratio) before use to achieve the desired adhesion. Because these adhesives harden immediately after mixing. Should be used as soon as the combination. Chinese stone, Chinese stone

If any of it is added, do not return it to the main container and throw it away. The main features of epoxy are excellent physical and mechanical strength, high resistance to thermal changes (freezing and thawing) and high speed. Cited . These adhesives can be produced in such a way that they have different curing times,

In this way, they can be used in different applications. These adhesives have a very high temperature tolerance and are more expensive than the polyester type. Epoxy is the best stone adhesive for having a strong and firm connection on all types of stones (even hard and smooth stones such as granite). This adhesive is one of the few adhesives that is recommended for various internal and external applications.

Types of epoxy adhesives:
Ordinary epoxy adhesive (at room temperature)
Thermal epoxy adhesive (requires high temperature to react)
UV epoxy adhesive
Ordinary epoxy adhesives:
Two-component adhesives that show good adhesion to different substrates and are used to bond various materials such as metals, glass, concrete, stone, wood, tiles, ceramics and many plastics. This product has a strong chemical structure and resistance to External factors (such as weather conditions, etc.) are very durable. These adhesives can be stored at room temperature and to be used, the correct amount of two parts must be combined. Qorveh stone

Thermal epoxy adhesive:
 These adhesives are used in two forms, one component and two components. Thermal epoxy adhesives have a stronger structure and have a higher transfer temperature. The two-component type of adhesives are mainly used for high temperature resistant applications, such as the aerospace market and automotive manufacturing. In the single-component type, due to the pre-mixing of the components, there is no concern about mixing percentage problems and a very low temperature is required for storage. The use of one-component epoxy adhesives has become very important in recent years, especially in the assembly of electronics.

UV epoxy adhesive:
Adhesives that react by absorbing ultraviolet (UV) rays and are used to assemble electronics and general connections such as image sensor modules, display panels, etc. Qorveh stone

Powder stone adhesive
Of course, there are other adhesives on the market that are used to connect tiles and stones. Among these adhesives are powder adhesives, often known as tile adhesives. Cement-based adhesives, powder resins and polymers that are used by adding water to them. Porcelain stone

Due to the simultaneous presence of resin with fibers and water, powder adhesives have relatively good flexibility and adhesion and are used for bonding all types of ceramics, stones, tiles and bricks. These adhesives are resistant to moisture after drying due to their special polymer properties. It should be noted that these adhesives are not suitable for use on gypsum surfaces due to their composition.

Introducing existing stone adhesives
Mica, Melika, Glass, Raga and هستند are some of the relatively common stones that you may have heard of.

These are two-component adhesives based on polyester, the second component of which (its hardener) is supplied separately in a tube. These adhesives can be used in industry, construction, facade and home applications. Among the features of this adhesive are:

Proper drying time in different seasons
High quality of appearance and interior
Good resistance to water, cold and heat
Ability to turn and sand
Slight volume change
It is possible to add color to this adhesive to achieve the desired color.

How to use glass glue, mica and…:

Generally, for each amount of adhesive used, 1% of that amount should be mixed with its hardener. The name of this hardener is hardener or benzoyl peroxide, which when combined with the adhesive makes the adhesive hard and firm. In fact, hardener plays an important role in the quality of the adhesive. Chinese stone, Chinese stone

Make sure that the place to be glued should be completely clean and free of any materials (whether solvent or non-solvent), dust and dirt. Because otherwise it will prevent sticking. Solvents are stronger than oil and diesel. Therefore, the presence of these two substances will not cause any problem if the adhesive dries completely.

Megapox glue, the strongest stone glue in the world
Megapox adhesives are one of the strongest stone adhesives in the world. This adhesive is a product of Megapox Company from Australia and has an active representative all over the world. Megapox Company has gained a special place in various industries (including shipbuilding, electronics, construction) due to its unique quality in the production of adhesive and resin products.

Since the subject we are discussing is related to the building, so we only examine its construction adhesives. The stone adhesives produced by this company have a two-component structure (Part A, B) and are based on epoxy. Megapox PM, Megapox PF, Megapox 69, Megaband and… are among the adhesives used in the field of construction. Chinese stone

Each of which has its own technical specifications and instructions. All of these tips and do's and don'ts are fully taught. That is why everyone is able to use these adhesives, even if they have not used Sang-e-Nama and چ adhesives before!

Introducing the best sealing and coating products for all types of surfaces
As mentioned earlier, in addition to adhesive products, the company has produced quality resins called Megapoxy H, Megapoxy HX, Megapoxy MC.

Megapoxy H strengthens the rock by penetrating deep into the cracks. It also has an effective role in grinding and polishing the stone. This resin is used in stone cutting factories to strengthen as many types of building stones as possible. Qorveh stone, Qorveh stone

Megapoxy HX is used for natural slabs to prevent damage due to cutting, installation, transportation, netting, mesh behind the stone and filling of stone pores in a transparent manner. This resin can also be used as a protective coating to seal all types of surfaces. Other uses of HG megapoxy resin for various uses such as:

Sealing cracked concrete
Grout replacement
Car crossings and railways, bridges
Anti-slip surfaces
Megapoxy MC resin with colored epoxy base, which is more concentrated than the two types mentioned above, and is used to cover swimming pools (sealing and paint), facades and production halls, elevator shafts, steel structures, shipbuilding and sealing toilets, stone And…. This resin is used as a sanitary and dustproof coating for floors and walls. One of the most obvious advantages of this product is its anti-scratch. It can also be used as a paint.